Machine Shop Services

Cylinder Heads

Whether you have blown a head gasket and want to check the head before reinstalling or want to totally rebuild the head to O.E.M. specs we have you covered!

  • ResurfacingClinder Head Honing
  • Injector tube replacement
  • Pre-combustion chambers repaired
  • Magnetic particle inspection
  • Pressure test capabilities to find cracks/leaks
  • Valve seat and valve guides replaced as necessary
  • Valve seat angles cut with 3 angle inserts in same set up
  • Resurface exhaust ports
  • Crack repair
  • Remove and install cam bearings on overhead cam engines
  • Repair cam bearing bores on overhead cam cylinder heads

Cylinder Block Repair

  • Complete and thorough checkout including magnetic particle inspection and pressure testing
  • All critical dimensions measured, recorded, and compared to OEM specifications, repairs estimated accordingly
  • Fabricate and install brass water passage repairs to repair erosion of the parent metal
  • Deck resurfacing done with inserts to meet OEM surface finish criteria on numerically controlled Rottler mill machine
  • Cylinders bored
  • Resurfacing capabilities
  • Cylinder blocks resurfaced and bored in same set up
  • Additional repairs include installing upper and lower bushings, lifter bore and cam bore repairs, and align bore

Crankshafts and Camshafts

  • Magnaflux Inspections for Crack Detection
  • Wet magnetic particle inspection
  • Inspect for hardness and straightness
  • Polish and grind crankshafts
  • Indexing and stroke equalizing
  • Plugs removed and oil galleys cleaned
  • Profilometer – surface finish gauge
  • Snout repair, machine keyway, and gear installation capabilities
  • Remanufactured crankshafts exchanged and sold

Connecting Rods

  • Complete Recondition
  • Replace pin bushings
  • Magnetic particle inspection
  • Recondition rod housing bore
  • Internally grind rod housing bore
  • Check center to center, bend, and twist
  • Replace pin bushings

NDT Testing

Nondestructive testing (NDT) is the process of inspecting, testing, or evaluating materials, components or assemblies for discontinuities, or differences in characteristics without destroying the serviceability of the part or system. In other words, when the inspection or test is completed the part can still be used

Fuel & Turbo Shop Services

Injection Pumps

  • Complete Inspection & Diagnostics6.2pump
  • Complete rebuild to OEM Specifications
  • Replacement pumps
  • Dyno testing to ensure quality
  • Worn parts replacement
  • Efficient Process

Fuel Injectors

  • Diagnostics
  • Complete Rebuild to OEM Specifications
  • Replacements
  • Pressure Testingturbo


  • Complete Rebuild to OEM Specifications
  • Turbo Balancing
  • Media Blasting
  • Worn parts replacement
  • Guaranteed quality



Please visit the Contact us page to inquire and find out more about what we can do for you!